Plustek SmartOffice PS286 Plus, Руководство пользователя

Страница: 138 / 220

8
C
HAPTER
I. I
NSTALLING THE
S
CANNER
Before installing your scanner, please verify that you have all of the proper
components. A list of the package contents is provided in the “Box Contents” section of
this guide.
S
OFTWARE
I
NSTALLATION
R
EQUIREMENTS
Your scanner comes with the scanner’s driver and MacAction II. All of these
software applications use approximately 800 megabytes of hard disk space after they
are installed into your computer. To ensure ample room for the installation, as well as
for scanning and saving images, a minimum of 2 GB of hard disk space is
recommended.
This USB scanner can only operate under the Mac OS X 10.12 / 10.13 / 10.14 /
10.15 operating system.
H
ARDWARE
R
EQUIREMENTS
This scanner connects to your computer through the Universal Serial Bus (USB)
which supports HOT PLUG AND PLAY. To determine whether your computer is USB-
capable, you must check the rear of your PC to locate a USB jack that looks like the
picture below. If you are having trouble in locating the USB port on your computer,
please refer to the hardware manual that came with your computer.
Upon examination, you should find one or two rectangular USB ports, which usually
appear as shown below.
If you don’t find such USB ports on your computer, then you need to purchase a
certified USB interface card to add USB capabilities to your computer.
USB Connector(s)