Plustek SmartOffice PL1530, Руководство пользователя

Страница: 15 / 44

publisher of this driver software” might be prompted. Please ignore it, and click on
[Install this driver software anyway] to continue the installation without any
misgiving at your scanner functioning.
8. When the system completes the installation, click the Finish button.
9. Follow the on-screen instructions to install all software that your new scanner
requires.
10. After the software is installed, close all open applications and click the Finish
button to restart your computer.
11. After the computer is restarted, you will be prompted to perform the scanner
calibration.
12. Insert the special calibration sheet into the ADF of the scanner.
13. Follow the on-screen instructions to complete the scanner calibration.
After the calibration is complete, click OK and then click Finish .
Information
If the scanner installation is not started and
displayed automatically on the screen, click Start ,
select Run and type in D:\Install (where D: is the
drive letter assigned to the CD-ROM drive of your
computer.)
S
S
t
t
e
e
p
p
3
3
.
.
T
T
e
e
s
s
t
t
i
i
n
n
g
g
t
t
h
h
e
e
S
S
c
c
a
a
n
n
n
n
e
e
r
r
The following describes how you can check if the scanner is properly functioning
with your computer and the scanning software by performing your first scan with our
bundled application NewSoft Presto! PageManager. Before testing your scanner,
double check to make sure that all connections are securely fastened.
To test the flatbed scanning:
1. Open the scanner's document cover. Place a document face down onto the
scanner glass and align the document top with the reference mark.
11