Plustek NVR Slim380Pro, Руководство пользователя, Страница: 16 / 57

12
Connect to your NVR from any computer using EasyLink and UDID
1. Visit our website to download the EasyLink setup program or insert the installation
CD into your CD-ROM drive. Launch the setup program to install the EasyLink
program. If you used the USB drive method to obtain the UDID, connect it to your
computer.
2. Launch the EasyLink program from the shortcut from your desktop. If you used the
USB drive method to obtain the UDID, launch the EasyLink.exe file on your USB
drive. If you are prompted to allow the program through the Windows Firewall,
please click on the “Allow access” button to allow it.
3. Enter the 20-digit UDID into the UDID field. If you used the USB drive method
described earlier, the UDID will be loaded automatically. Enter the HTTP port
number if needed. The default port number is 80.
4. Click on the “Create Tunnel” button.
5. Click on the “Connect” button. The NVR’s login window will open in your default
web browser.
6. Enter the NVR’s “Username” and “Password” and change the “Language” if
necessary, then click on the “Login” button to log in to the NVR.
Attention
The connection dialog of the EasyLink program has to be
kept open when using this method to connect to your NVR. If
you accidently close the EasyLink program, just launch it
again and click on the “Create Tunnel” button to continue
using your NVR.
If the NVR system times out due to inactivity, you need to
close and re-launch the EasyLink program. Then click on the
“Create Tunnel” button to continue using your NVR.
When you are done using the NVR, click on the “LogOut”
button on the NVR homepage, then click on the “Close” and
“Exit” button in the EasyLink program.