Plus NF-20, Руководство пользователя

Страница: 14 / 54

E-14
There are three ways to make the device settings: using the NETWORK FLIPCHART’s operation buttons to
make the settings (“CB Setup”), making the settings using a USB connection (simple network settings, and
making the settings via LAN (detailed settings: “CB Setup” and “Network Setting”.
CB Setup (operating the NETWORK FLIPCHART’s buttons)
Basic setting operation
• Check that the power is on (that the display window is lit).
• When in the “CB Setup” mode, the NETWORK FLIPCHART will return to the normal mode if no buttons are operated for 10
seconds, so operate the buttons within 10 seconds.
CB Setup and Network Setting Procedure
Switch to the CB Setup mode.
While pressing the ON/Standby button, press
the Number of Copies button, then release
the ON/Standby button. The NETWORK
FLIPCHART switches to the CB Setup mode.
“F1” appears on the display window.
“F1” is the time setting. For instructions on the
time setting, see page E-12.
Select “the function number”, then
press the Save button.
Press the Number of Copies button (the func-
tion switches each time the button is pressed,
returning to F1 after FC) to select the desired
function number, then press the Save
button
to set that function number.
For the item names of the function numbers, see
the “Table of Function Numbers and Settings” on
the following page.
• When the Save button is pressed, the func-
tion number to be changed is set and a dot
lights (ex.: “F6.”).
Select “the setting”, then press the
Save button.
Press the Color Print or B/W Print button,
check the setting, then press the Save button
to set.
Check the setting according to whether the USB
and Printer Status indicators are lit or off. See the
“Table of Function Numbers and Settings” on the
following page.
Exit the CB Setup mode.
Press the ON/Standby button. The NET-
WORK FLIPCHART returns to the normal mode.
The display window returns to the number of
copies display.
CB Setup mode
Dot lit
Normal mode