Plura RUB VI, Дополнение к руководству по установке и системам

Страница: 25 / 32

Functional Description and Specifications RUB VI
Page 25
4.3
“Functions“
Click on Functions to see all applicable tabs/pages listed, and to activate or deactivate
tabs/pages.
For example (screen shot of the PC program tab):
A tab/page reflects a function of the module. The columns Edit and Use determine whether
the function in the module is activated/deactivated and whether user configuration of that
specific function is allowed or not.
Click on the applicable Edit and/or Use check boxes to activate/deactivate a function:
Edit Use
Function is deactivated, the tab/page is not visible.
  Function is activated, the tab/page is visible and configurable.
 Function is activated but the tab/page not visible and therefore not
configurable.
• We suggest that you deactivate the Use check boxes of all functions you are presently
not using.
•
We suggest that you deactivate the Edit check boxes of all functions you are presently
not configuring. That avoids unintentional operating and malfunctions.
List of tabs/functions:
Profile Store and Load Configurations on the Module (*)
System Identification, Reset, SNMP, Fan Control
Keys Keys, Lamps and LEDs
Distribution Set-Up the Changeover and Alarm Characteristics
(*) refer to “Installation & Systems Manual RUBIDIUM SERIES”