Plura RUB VI, Дополнение к руководству по установке и системам

Страница: 12 / 32

Functional Description and Specifications RUB VI
Page 12
2.2 Monitoring and Status Information
This module monitors the signals at the seven output stages with respect to frequency,
minimum amp litude (see chapter “Specifications” as well), and plausible time data.
An error detected at the spare output could be considered as an error of the signal input.
There is a changeover relay at each of the six outputs. If an error is detected at an output
stage, the spare signal can be switched to the corresponding output.
The Status Monitor gives you all the relevant information.
Signal status if no input signal is connected:
Signal status if the input signal fails:
Signal status if one output stage fails: