Plura RUB VI, Дополнение к руководству по установке и системам

Страница: 10 / 32

Functional Description and Specifications RUB VI
Page 10
1.6 Software Update
Software updates require a (windows operating system) computer and the “RUBIDI UM
CONFIGURATION“ program. You can download the latest version of the program from:
https://www.plurainc.com .
Please check the PC connector at your RUBIDIUM housing: There is an USB or RS232 (with a
DSUB9 connector) interface installed. You now need the same interface at your computer.
The new firmware should already be stored as a .tcf file at your computer.
Please now execute the following steps:
1.
Connect your computer to the PC connector of that RUBIDIUM frame where the module
has been plugged.
In case of an RS232 interface: Use a straight (1:1) connection between the
PC connector
at the RUBIDIUM frame and the RS232 of the computer.
In case of an USB interface: Use a USB A-B cable between your computer and the
RUBIDIUM frame.
Switch on the power of all units.
2. Execute “Rubidium Config.exe” on your computer. Select the “Port” according to the
interface (USB, RS232) you are using.
3. Select the module (unit 1, 2, 3 ...).
4. Select “Flash Update“ in the File menu.
5. Open the .tcf - file. Standard name: “Rubidium VI version.tcf“.
“version” stands for a revision no., e.g. 2.11.12.
Click the OK button, update starts. Click the OK button at the end.
6. Update is finished now. We recommend checking module’s configuration utilizing the
“RUBIDIUM CONFIGURATION“ program .
During the flash update the operation of the module stops!
The changeover relays will switch to their default position, the spare output functionality will
not be available during the flash update.