Plum ecoMAX920P1-S TOUCH, Инструкция по установке и эксплуатации, Страница: 40 / 48

40
14.6 Other parameters
Parameter Description
Maximum feeder
temperature Determines maximum feeder temperature at which the alarm of exceeding maximum feeder temp.
trips.
Maximum exhaust
temperature
Determines max. exhaust temp. at which the alarm of exceeding max. exhaust temp. trips. The alarm
is sustained when the temperature sustains over 1min. above the indicated level. Setting value to
„0”
switches alarm off.
Outputs test time
After this time all devices, that were switched ON in Manual control menu, will be switched off
automatically.
Show advanced
Available options:

YES
– displays hidden parameters edit of which is not recommended,

NO
– hides hidden parameters.
Restore default
settings
By restoring factory settings user settings from main menu will also be restored.
Save service
settings
Save all service parameters set by user to internal memory of the controller.
Touch panel
calibration
Setting the precision of panel display response to the selected touch point.