Plockmatic BLM 35, Руководство оператора

Страница: 77 / 108

77
6
NOTE:
During poor environmental conditions waste from the trimming operation may be transported
through the system.
To improve the situation, the trim margin may be increased and thereby ensuring that the waste is
transported into the waste bin.
Trimmer fault codes
Belt stacker fault codes
Trimmer
Code / message Explanation / action
TR-001 - TR-153 Possible fault in
area, please power off and power on to
recover!
Indicates that there might be an internal communication
error. Power off and on the system. If problem persists,
contact customer support.
TR-201 - TR-206 Clear misfeed A misfeed has occurred in the Trimmer.
See section 5, “Clearing Misfeed(s)” for how to clear
misfeed(s).
Empty trim waste bin from Face
Trimmer!
Indicates that the trim bin is full or that a trim strip, due
to static electricity, is prevented from falling down into
the trim bin. Empty the trim bin and remove loose trim
strips from inside the Trimmer. See section 1, “Basics.”
for how to remove the trim bin.
Close infeed belts! Indicates that the infeed roller shaft assy. is lifted. Close
it. See section 5, “Clearing Misfeed(s).”
Close exit belts! Indicates that the exit compressing brackets are lifted.
Close them. See section 5, “Clearing Misfeed(s).”
Close infeed and exit belts! Indicates that the infeed roller shaft assy. and the exit
compressing brackets are lifted. Close them. See
section 5, “Clearing Misfeed(s).”
Belt stacker
Code / message Explanation / action
Stacker full, please empty stacker! Stacker is full. Empty stacker.