Plockmatic BLM 35, Руководство оператора

Страница: 50 / 108

50
2
Crease
Crease Mode
Crease position
From the Settings for Booklet Production
screen, press the [Crease] button.
Press the corresponding button to choose [On
Fine], [On Coarse] or [OFF].
Fine is recommended for cover sheets less than
120 gsm / 32 lb Bond.
For sheets heavier than that, select Coarse.
When you want to turn the Creaser off, select
Off.
Press the green [check] button to confirm.
The crease is initially set to the center of the
sheet. Operators have the option to offset the
position of the crease using the [+] or [-] buttons.
Press the [+] button move position closer to the
lead edge and press the [-] button move posi-
tion closer to the trail edge. Regardless if you
chose Fine or Coarse creasing, each press of a
button will move the crease 0.1 mm / 0.004”.
When done, press the green [check] button to
confirm.
The illustration shows that the crease is offset
0.5 mm towards the trail edge .
The Crease function makes it possible to crease the cover sheet of the booklet in order to avoid
toner cracking or flaking at the fold.