What’s in each box:
MasterBelt
• MasterBelt
• Li-Poly rechargeable battery
• 3.5mm to 3.5mm 3 conductor data pairing cable
»
Used to pair a BaseStation to the BeltStation(s)
• USB-A to Mini-USB
»
Used to update MasterBelt or BeltStation firmware
• 5VDC wall charger with Mini USB connector
• CD with manual
What else you may need:
• Headset, one for each user
»
May be dynamic or electret microphone, with a 4-PIN XLR female
connector
Important things you need to know:
• Tempest2400 operates in the 2400 to 2483 MHz frequency spectrum.
• The Tempest MasterBelt and BeltStation are shipped with a default RF
configuration. It is highly recommended that you change your system
from the default to ensure proper RF performance especially in the
presence of other Tempest systems.
• A BeltStation must be paired with a MasterBelt for any communication
to take place. Pairing should be done AFTER the default RF
configuration is changed on the BaseStation.
• Charge the MasterBelt and BeltStation batteries prior to starting set-up.
Tempest2400 MasterBelt
®
2-Channel Quick Start Guide
1
Quick Start Guide
Pliant Technologies, LLC
Tempest
®
205 Technology Parkway
Auburn, AL 36830
www.plianttechnologies.com
Phone +1.334.321.1160
Toll-Free 1.844.475.4268 or 1.844.4PLIANT
Fax +1.334.321.1162
Copyright © 2016 Pliant Technologies, LLC. All rights reserved. The Pliant
®
word mark and the Pliant “P” logo are trademarks of Pliant Technologies,
LLC. Tempest
®
and MasterBelt
®
are trademarks of CoachComm LLC. All other
trademarks are property of their respective owners.
Document Reference: 2018.11 D0000157_D
