Pliant CREWCOM CB2 Скачать руководство пользователя страница 3

Страница: 3 / 104

THANK YOU

We at Pliant

Technologies want to thank you for purchasing CrewCom

. Pliant brings our experience,

expertise, and commitment to quality technology with the new CrewCom CB2 System. In order to get

the most out of your new CrewCom product, please take a few moments to read this manual completely

so that you better understand the operation of this product. For questions not addressed in this manual,

feel free to review the additional support documentation provided on our

website

or to contact Pliant’s

Customer Support Department:

Pliant Technologies, LLC

205 Technology Parkway Auburn, AL 36830 USA

www.plianttechnologies.com

Phone: +1.334.321.1160

Toll-Free: 1.844.475.4268 or 1.844.4PLIANT

Fax: +1.334.321.1162

, CrewCom

, and

CrewNet

™

word marks and the Pliant “P” logo are trademarks of Pliant Technologies, LLC. Any and all

other trademark references within this document are property of their respective owners.

While Pliant makes every attempt to maintain the accuracy of the information contained in this manual,

this information is subject to change without notice, and published device/system functions and features

are subject to firmware version. Please check our website for the latest system specifications and

certifications.

Model Information

This document applies to models CB2-900, CB2-2400, CB2-900AN, CB2-2400CE, CRP-12-900,

CRP-12-2400, CRP-12-900AN, and CRP-12-2400CE.

Document Reference: 2020.10 D0000390_C

Thank You - iii

Содержание CREWCOM CB2









































































































Результаты поиска

Содержание CREWCOM CB2

Отзывы:

Бренды по названию

Популярные бренды

Pliant CREWCOM CB2, Руководство по эксплуатации

Результаты поиска

Содержание CREWCOM CB2

Отзывы:

Бренды по названию

Популярные бренды