Neurotechnology Research Systems
Optogenetic Controller
- 12 -
5.3
Turning on the power for the first time
5.3.1
Flip the power switch to the on position. The LED next to the switch on the end of the
Optogenetic Controller should illuminate.
5.3.2
The first time you turn the stimulator on a “Found New Hardware” balloon will appear in
the lower right hand corner of the computer screen. In Windows 7, the balloon changes
from “Installing device driver software” to “Opal Kelly XEM6001”. In Windows XP, the
Found New Hardware Wizard will appear. Choose Install the software automatically. After
it is finished, the balloon will change to “Your new hardware is installed and ready to use.”
Windows 7:
Windows XP: