6
vDisplay HDI-Pro IP Engine User Guide
Summary of vDisplay IP Engine Features
The vDisplay IP engine provides the features and functions listed in the following table.
Table 1: vDisplay HDI-Pro IP Engine Feature Summary
Key features
Ethernet interface
• 10/100/1000 Mbps
• IPv4
GigE Vision receiver device
*
• Persistent IP address
• DHCP
• LLA
• FORCEIP command of the GigE Vision Control Protocol (GVCP)
• ICMP
• GigE Vision stream receiver
• GigE Vision Streaming Control Protocol (GVSCP)
• Unicast
• Multicast (IGMPv2)
• Jumbo packets support
• 32 stream channels
• Configurable image buffering
Display interface
• HDMI connector (Type A)
• Single link video capabilities
• Display Capabilities Detection for VESA-compliant monitor
• Programmable video resolutions and timing
• Predefined DVI and CEA video format support
Autonomous control of GigE Vision compliant cameras
• Controls up to eight cameras
Imaging processing
• White balance: manual, once, and continuous
• 8 bits for monochrome rendering
• Option to display MSB or LSB of mono pixel
• Up to 10 bits for Bayer to RGB rendering
• 16 bits for YUV 4:2:2 to RGB rendering
• 24 bits for RGB pixel formats
Display channel tuner
User Set (for device configuration persistence)
Field upgradable
* Can be controlled and configured by any GigE Vision and GenICam compliant software supporting GigE Vision receiver devices.
