Pleora Technologies iPORT CL-Ten, Руководство пользователя, Страница: 42 / 72

38 iPORT Advanced Features User Guide
4.
In the TransportLayerControl category, select True .
Configuring Action Commands
You can configure a video interface to send action commands to one or several devices using the following
procedure.
To configure the video interface to perform an action command
1. Start eBUS Player and connect to the video interface.
2. Under
Parameters and Controls,
click
Device control
.
3. Click
Guru
in the
Visibility
list.
4. Under
Action Control
, select the action that you want the device to perform when the command
is executed in the
ActionSelector
list.
5. Under
Action Control
, specify the following information.
Device Key
. Authorizes the action on the device. Devices will take action only if their configured
device key and group key matches the value entered into the eBUS Player
ActionDeviceKey
box.
Group Key
. Defines the group of devices on which the action command is executed. Each device
will take action only if their configured group key matches the value entered into the eBUS Player
ActionGoupKey
box.