background image

PROBLEM

CAUSE

SOLUTION

Camera will not take a 

photo

Battery power is low or 

completely drained

Replace batteries with 4 x 1.5v fr

esh AA 

alkaline batteries. 

Camera is turned off

Slide the power switch to the ON position or 

press any button to exit standby mode.

Camera’s memory is full of 

images 

Download pictures to your computer or 

use 

 to delete some of the images. 

Camera will not project

Battery power is low or 

completely drained

Replace batteries with 4 x 1.5v fr

esh AA 

alkaline batteries.

Mode switch is not fully engaged

Make sure that mode s

witch is rotated all the 

way to Projector Mode.

Photos are blurry

Camera moved when the pictur

was taken

Try to keep the camer

a still when you are 

taking a picture.

Lens may be dirty

Wipe the lens with a soft cloth.

Photos will not transfer 

 

to the computer

USB cable may not be connected 

properly

Check both the camer

a and computer cable 

connections.

Power is not turned on

Slide the power switch on the back of the 

 

camera to the ON position.

Camera will not turn on or 

 

functions abnormally

Battery power is low or 

completely drained

Replace batteries with 4 x 1.5v fr

esh AA 

alkaline batteries.

Buttons are frozen

Press reset button.

Camera is in standby mode due 

to inactivity

Press any button.

Camera freezes

Minor glitch

Press reset button.

File system is corrupt

Connect the camera to your computer with a

 

USB cable (not included) while powering on.

 

Allow the computer to r

eformat the camera.

 

Please note that this will delete all of 

your photos.

Phillips/cross head screwdriver (not 
included) needed to insert batteries. Use 
screwdriver to loosen screw in battery 
compartment door (screws remain attached 
to door). Remove door. Insert 4 x 1.5V fresh 
AA batteries. Alkaline batteries are required. 
Replace door and tighten screw.

To deactivate all camera sounds, press and 
hold 

 , 

 and 

 at the same time. Hold 

for 5 seconds and/or until the 

 

icon appears. 

Silence Sound Effects

TROUBLESHOOTING

BATTERY 

INSTALLATION

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, 

and (2) this device must accept any interference 

received, including interference that may cause 

undesired operation.

NOTE: This equipment has been tested and found to 

comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against 

harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio 

frequency energy, and, if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications. However, there 

is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause 

harmful interference to radio or television reception, 

which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.

  •  Increase the separation between the equipment 

and receiver.

  •  Consult the dealer or an experienced radio/TV 

technician for help.

CAUTION: Changes or modifications to this unit not 

expressly approved by the party responsible for 

compliance could void the user’s authority to operate 

the equipment.

IMPORTANT: BATTER

Y INFORMA

TION

  CAUTION:

1. TO AVOID BA

TTERY LEAKAGE

a.  Always follo

w the instructions carefully

. Use only ba

tteries 

specified and be sure to insert them correctly by ma

tching the +

 

and – polarity markings.

b.  Do not mix old ba

tteries and new ba

tteries or standard (carbon-

zinc) with alkaline ba

tteries.

c.  Remove exhausted or dead ba

tteries from the product.

d.  Remove ba

tteries if product is not to be played with for a long

 

time.

e.  Do not short-circuit the supply terminals.

f.  RECHARGEABLE BA

TTERIES: Do not mix these with an

y other 

types of batteries.

 Always remove from the product before

 

recharging.

 Recharge ba

tteries under adult super

vision. DO NOT

 

RECHARGE OTHER 

TYPES OF BA

TTERIES.

2. Should this product cause,

 or be affected by

, local electrical

 

interference,

 move it away from other electrical equipment.

 Reset 

(switching off and back on a

gain or removing and re-inserting

 

batteries) if necessar

y.

©2012 Hasbro, Pawtucket, RI 02861-1059 USA. Questions? Call 1-800-PLAYSKL  

Consumer Services: Hasbro UK Ltd., PO Box 43, Newport NP19 4YD UK. 

 00800 22427276. [email protected]; www.hasbro.co.uk.

0-3

©2012

 Hasbro.

 All

 Rights

 Reserved.

 TM

 &

 ®

 denote

 U.S.

 T

rademarks.

 A2875/7340250000

Manufactured

 by

 Hasbro

 SA,

 Rue

 Emile-Boéchat

 31,

 2800

 Delémont

 CH.

 Represented by Hasbro 

Europe,

 2

 Roundwood

 A

ve,

 Stockley

 Park,

 Uxbridge,

 Middlesex,

 UB1

1AZ.

 UK.

 Colours 

and 

contents 

may

 vary

 from

 those

 shown.

 Please

 retain

 this

 information

 for

 future

 reference.

 MADE

 IN

 CHINA.

 

NOTE

 T

O

 UK

 CONSUMERS:

 This

 product

 and

 its

 batteries

 must

 be

 disposed

 of

 separately

  

 

at

 your

 local

 waste

 recycling

 centre.

  Do

 not

 dispose

 of

 in

 your

 hou

sehold

 waste

 bin.

Отзывы: