Platoscience PlatoWork, Руководство пользователя, Страница: 6 / 15

PlatoWork setup
1.
Activate
​
the headset
​ ​
by simply unfolding it (it will make a 'click' sound when it’s fully
opened). When the headset is turned on, the logo on the left side of the headset will blink
blue.
2.
Connect.
​
​
Open the PlatoWork App, and the headset will automatically connect with your
phone (make sure your phone’s bluetooth is turned on). The logo on the headset will turn
from blinking blue to solid blue once it is connected.
3.
Place the sponges
​
.
​ ​
Make sure that the sponges
​
are fully moist with saltwater, but not
dripping wet. Place a sponge in each of the three black electrodes.
4.
Put the headset on
​
.
​
Make sure that the two textured silicone pads are placed right
above the ears, and that you have two sponges in the front and one in the back. Use four
fingers to measure the distance between the centre of your eyebrows and the bottom of
the two front sponges to ensure that the headset is correctly placed.
5.
Ensure headset fit.
​
For the headset to work, it has to sit tightly on your head so all
three sponges are firmly pressed against your skull
​
.
​
If the headset feels too loose
​
,
​
adjust
the sliders to obtain a tight fit between the sponges and your head.
6.
Select mode.
​
When you have ensured a good headset fit, select your stimulation mode
in the app. When starting the session, the app will first test that the headset has sufficient
contact with your head. When the test is successful, you can put your phone away and
begin your task.
5