Platoscience PlatoWork, Руководство пользователя, Страница: 5 / 15

Prepare the Essentials
Saltwater
Ensure the bottle provided is filled with saltwater, used to soak the
electrode sponges. Prepare the saltwater by filling the bottle with
drinkable water. Add 1/4 teaspoon of regular kitchen salt into the
water, replace the lid and shake the mixture.
(more info about the saltwater on
​
page 6
​
)
Sponges
The sponges provided are compressed and need to be soaked in saltwater
before use. Moisten 3 dry sponges (1 mm thickness) with the saltwater until
they are fully expanded (5mm thickness).
Tip: ​
​
Fill all 3 sponge cases with saltwater and ​
​
dip the dry sponge in it.
Charging the headset
When you receive PlatoWork, the built-in battery is already charged. The app will
indicate when your headset needs charging. You can find the charging port on the
side, which is only accessible when you collapse the headset. Connect the cable
that is present in the box and the other end to any USB port.
A small green light next to the charging port will indicate that the battery is
recharging. The light will turn off when the battery is fully charged. Recharging a
flat battery will take approximately 1 hour.
Start a neurostimulation session
Now that you are familiar with PlatoWork and you have prepared the essentials, you are ready to
start a neurostimulation session.
As is with most new devices, it might take some attempts to find the right fit and get the first
session going. Setup will become easier, as you become more familiar with your PlatoWork
headset.
We recommend starting with the “Learn” mode on your app, for your first session. Our users have
found that this mode gives the best first-time experience.
4