To make a call:
dial the number via your softphone application.
To answer or end a call:
press the answer/end button
For softphones not compatible with Spokes:
check the Spokes compatibility list at
www.plantronics.com/media/downloads/SoftphoneCompatibility.pdf
for the most current
information.
If your softphone is not currently supported by Spokes, answer/end via pressing the call button
on the headset will not function; you must answer the call from the softphone.
If your softphone has this feature, holding down the answer/end button for 2 seconds will
place the call on hold. Refer to your phone's user guide for additional features available while
on hold. Pressing the answer/end button will take the call off hold.
To increase listening volume, press the upper end (+) of the volume button. To decrease the
listening volume, press the lower end (-).
To adjust the listen or speak volume of the softphone, please refer to the softphones user
documentation.
To adjust the listen or speak volume of the audio device on the computer, use the Sound and
Audio Device section of the control panel.
During a call, briefly press the mute button to mute the microphone. When muted, the mute
indicator light will be lit.
To unmute press the button again.
Use your headset
Answer, end and make
calls with Spokes
Put a call on hold
Adjust volume
Mute a call
7
