Planmeca Sovereign Classic Скачать руководство пользователя страница 251

Страница: 251 / 298

Do not use lubricating oil on the Morita TORX micromotor (with the exception

of its O-rings).
Throw away the intraoral camera’s disposable hygiene sleeve after use.

30.4 Instrument console

30.4.1 Oil collector

The oil collector underneath the instrument console has to be checked

weekly and emptied when full.
You can check how full the oil collector is without removing it completely.

Pull the oil collector downward from the attachment knob (1) and check the

oil level in the narrower chamber (2). If it has started to fill, it is time to empty

the oil collector.

30 Cleaning and disinfection

User's manual

Planmeca Sovereign Classic 241

Содержание Sovereign Classic











































































































































































































































































































Результаты поиска

Содержание Sovereign Classic

Отзывы:

Planmeca Sovereign Classic, Руководство пользователя, Страница: 251 / 298

Результаты поиска

Содержание Sovereign Classic

Отзывы: