Planmeca Sovereign Classic, Руководство пользователя

Страница: 187 / 298

26.3 Automatic chair positions
When you have signed in to the dental unit with your own user name, all
changes you make to the automatic chair positions and then save, are saved
to your user profile. This means that whenever you sign in to the dental unit,
you will use your last saved automatic chair positions.
26.3.1 Extended view
About this task
NOTE
If you only want to rename the automatic position or adjust its position on the
list, start programming from step 4.
Steps
1. Move the chair to the required position by using the chair movement
buttons on the control panel or by using the foot control.
2. If you want the operating light or its composite mode to be on (off) in this
position, turn them on (off).
3. Adjust the intensity of the operating light and/or its composite mode as
described in section "Intensity" on page 191.
4. Press Program.
5. Press the Chair positions button.
A list of automatic positions opens.
6. Select the wanted chair position by pressing it on the list.
The field of the position that you have selected from the list (position C in
picture) turns blue.
26 Programming
User's manual Planmeca Sovereign Classic 177