Planmeca Sovereign Classic, Руководство пользователя, Страница: 181 / 298

Interface Action
Foot control In the Planmeca Sovereign Classic dental unit you
can program the foot control so that the frozen image
is saved when you push the pedal or one of the side
knobs.
Handpiece Press the Image control button for two seconds.
Note! When saving an image from the handpiece,
you can, but do not have to freeze the image first.
Planmeca Romexis When the image is frozen, press the Save button at
the bottom of the intraoral camera window.
Turning off intraoral camera
Deactivate the intraoral camera from the dental unit when you have finished
working with it.
Deactivate the intraoral camera with the foot control according to how you
have programmed it.
You can also program the dental unit so that the intraoral camera is
deactivated when you press the Flexy button.
When the camera is deactivated, the indicator light on the handpiece goes
off. Return the intraoral camera to its holder.
24.8 Planmeca intraoral scanner
The Planmeca intraoral scanner is used together with Planmeca Romexis
and Planmeca PlanCAD Easy software. The scanner is mainly operated with
the software, but to make the scanning procedure easier, some of the
operations can also be performed from the dental unit’s foot control.
The intraoral scanner is placed in the Flexy-holder.
CAUTION
Make sure that you attach the intraoral scanner connector the right way into
the USB 3.0 port for the scanner on the cuspidor. If the connector is turned
the wrong way, it will not go into the port. Use of unnecessary force will
break the connector.
NOTE
There are two ports on the cuspidor. Make sure you attach the connector to
the port marked "Planmeca specified USB device only".
NOTE
To avoid splashes on the scanner, remove it from the dental unit after use
and place it on the table stand.
For more information, see Planmeca FIT user’s manual.
24.8.1 Operating intraoral scanner from foot control
The following scanner operations can be activated from the foot control:
•
activate and deactivate the instrument view,
• select the scanning mode by moving up and down in the list of scan type
selection tools in the Planmeca Romexis menu on the monitor,
• start scanning,
24 Operating instruments
User's manual Planmeca Sovereign Classic 171