Planmeca Proline EC ceph, Техническое руководство

Страница: 20 / 210

Chapter A - GENERAL & TECHNICAL DATA
A-12 Planmeca Proline EC X-ray unit
EMC INFORMATION
Technical Manual
5 EMC INFORMATION
WARNING
Use of any accessories and cables other than those specified in Planmeca Pro-
line EC X-ray unit’s documentation, with exception of cables sold by Planmeca
as replacement parts for internal components, may result in increased emis-
sion or decreased immunity of the X-ray unit.
WARNING
Planmeca Proline EC X-ray unit should not be used adjacent to or stacked with
other equipment. If adjacent or stacked use is necessary, the Planmeca Proline
EC X-ray unit should be observed to verify normal operation in configuration
which it will be used.
Guidance and manufacturer’s declaration - electromagnetic emissions
Planmeca Proline EC X-ray unit is intended for use in the electromagnetic environment specified
below. The customer or the user of the Planmeca Proline EC X-ray unit should assure that it is
used in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1
Planmeca Proline EC X-ray unit uses RF energy
only for its internal function. Therefore, its RF
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class B
Planmeca Proline EC X-ray unit is suitable for
use in all establishments, including domestic
establishments and those directly connected to
the public low-voltage power supply network that
supplies buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies