Planmeca Compact i Touch v2 Скачать руководство пользователя страница 199

Страница: 199 / 314

25.6.3 Duration of cup filling

About this task

NOTE

By default, the cup fill is not activated unless the cup is positioned in its

place under the cup fill tube. To change this setting, contact your Planmeca

dealer.

NOTE

The water in the dental unit is intended for rinsing only, not for drinking.

Steps

1. Press Program.

2. Press Cup fill.

A pop-up window opens.

3. Adjust the duration of the cup filling.

The minimum value is 2 seconds and the maximum is 10 seconds. The

duration is adjusted in steps of 0.5 seconds.

4. Press OK.

The pop-up window closes.

What to do next

The duration of the cup filling can also be programmed as follows:
1. Place an empty cup to the cup holder.
2. Press Program.

3. Press Cup fill.

25 Programming

User's manual

Planmeca Compact i 189

Содержание Compact i Touch v2



























































































































































































































































































































Результаты поиска

Содержание Compact i Touch v2

Отзывы:

Planmeca Compact i Touch v2, Руководство пользователя, Страница: 199 / 314

Результаты поиска

Содержание Compact i Touch v2

Отзывы: