Planmeca Chairside PlanCAD Easy, Руководство пользователя

Страница: 92 / 180

18 DESIGN
86 Planmeca Chairside CAD/CAM solution User’s manual
18.1.4 Anatomy levels
The anatomy levels enable you to deactivate Autogenesis
and/or select different anatomy details for this proposal.
Most restorations will use the default settings.
NOTE
The red line on the Detail slider represents the maximum
amount of detail that can be milled into a restoration.
If desired, use the sliders to change the amount of Detail,
Slope, and/or Wear.
To deactivate Autogenesis, clear Autogenesis.
Click Apply if any changes have been made to the library,
Autogenesis activation, or anatomy levels.
18.1.5 Pre-op as library tooth
When Pre-op is selected as the Library tooth,
Autogenesis combines the pre-op selection with the
Library A tooth. Use the following steps to move or resize
the library A tooth to modify the proposal, if desired.
1. Click Tooth Libraries.
The Pre-op selection preview displays as green and the
Library A tooth as dark red.
Move and/or resize the library tooth for a closer match to
the pre-op selection.
2. Click Apply.
3. Repeat as needed.
18.2 Viewing options
The
Design
tab contains additional viewing options to aid
in optimizing the design that appear below and to the right
of the restoration. These functions can be used with most
of the tools listed above.
18.2.1 Hide model
To show / hide the adjacent teeth click this button. This is
especially helpful when adjusting the contact area.