Planika Galio Fire Pit Black Скачать руководство пользователя страница 23

Страница: 23 / 25

www.planikafires.com

IG0150#05

29.06.2020

MAINTENANCE AND UPKEEP

We recommend cleaning the pilot flame and the main burner unit before the device is started again after its

been removed from storage during the winter period.

6.1.

Testing and cleaning

Please check and clean if necessary:

•

The main burner - if necessary, remove broken parts of stones and the existing dust.

•

Pilot burner and thermo-couple (if necessary, remove the existing sediment). In the event of visible damage

contact your dealer.

•

Igniter - gap between igniter and pilot flame should not be bigger than 5 mm.

•

Glass screens

–

check for dirt smudges or possible scratches or cracks. If cracks are present replace the glass

screen for a new one. To conduct this contact your dealer.

•

Gas linkage and pressure regulator (in case their expiry date is invalid replace these ancillaries for new ones).

•

If you encountered problems with the regulator, gas linkage, burner or regulation valves do not try to fix these

parts. Contact a sales person, an authorised service or an importer in order to acquire spare parts. To ensure

the device is working efficiently use only original spare parts.

Содержание Galio Fire Pit Black


























Результаты поиска

Содержание Galio Fire Pit Black

Отзывы:

Похожие инструкции для Galio Fire Pit Black

Бренды по названию

Популярные бренды

Planika Galio Fire Pit Black, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Galio Fire Pit Black

Отзывы:

Похожие инструкции для Galio Fire Pit Black

Бренды по названию

Популярные бренды