22
Low Battery Receiver
With low battery power in the receiver the system shuts off the fire completely. This will not happen if the power
supply is interrupted.
On-Demand Pilot
•
This green feature eliminates gas energy consumption during extended appliance inactivity. When the appliance
is inactive for an extended period of time the system automatically extinguishes the pilot. This feature helps the
consumer realize cost benefits by automatically eliminating energy consumption during non-heating months and
limited use.
•
The programmed length of inactivity to activate the system is specified by the appliance manufacturer and cannot
be altered in the field.
6.6.
Wall Switch
Fig. 22
–
Wallswitch
To Turn ON Appliance
•
Press
ON-OFF
button until two short beeps confirm the start sequence has begun; release button.
•
Once pilot ignition is confirmed, there is main gas flow.
Standby Mode (Pilot Flame)
•
Press and hold
(small flame) button to set appliance at pilot flame.
To Turn OFF Appliance
•
Press
ON-OFF
button.
Flame Height Adjustment
•
Press and hold
(large flame) button to increase flame height.
•
Press and hold
(small flame) button to decrease flame height or to set appliance at pilot flame.
