3.4 Telnet login
The switch also supports telnet for remote management. The switch asks for user name and password
for remote login when using telnet, please use
“admin”
for username and
“admin”
for password.
3.5 Commands
There are two levels for console commands. The first level provides commands to show system
informations and current configurations. The second level (
privileged mode
) provides commands to set,
clear and show the configuration.
3.5.1 First level commands
The follow table lists the first commands and the equivalent usages.
Command
Description
enable
Enable privileged mode
show channel
Show channel information
show console-info
Show console-info
show igmp-snooping
Show igmp snooping information
show ip http server
Show http server information
show ip telnet server
Show telnet server information
show mirror
Show mirror information
show multicast router
Show multicast router port information
show port counter
Show port counter information
show port rate-shaping
Show port ingress and egress rate-shaping
show port spantree
Show spantree information on ports
show port state
Show port infomation
show port storm-limit
Show port storm limit mode and rate
show qos map cos-queue-map
Show qos map cos-queue-map
show qos map dot1p-cos-map
Show qos map cos-queue-map
show qos map mac-cos-map
Show qos map mac-cos-map
show qos map port-cos-map
Show each port's cos
show qos map vlan-cos-map
Show qos map vlan-cos-map
show qos queue egress-policy
Show qos queue egress-policy
show security MAC-aging
Show MAC aging time
show security filter-MAC
Show MAC filter entry
