8
4. Starting AP Management
There are different models including indoor and outdoor AP series that can be
managed by AP Managed Switch.
Note
Please regularly check PLANET website for the latest managed AP
compatibility list.
For the AP models that do not support DHCP IP, please configure them to use a
different static IP before connecting them to the same managed network.
If you prefer to use DHCP IP for the AP models that support DHCP IP, please
ensure the DHCP server exists in the managed network.
Step 1.
In the AP Managed Switch, go to
“System-> DHCP Server-> Mode”
page to enable DHCP server and then go to
“Maintenance-> Switch
Maintenance-> Save Startup Config”
to click
“Save Configuration”
.
Figure 4-1
DHCP Server
Figure 4-2
Save Configuration
Note
If you have configured the AP to static IP or the DHCP server is
already existed in the managed network, ignore this step and
continue the AP management according to the following steps.
