5.3 LAN
The LAN Port screen below allows you to specify a private IP address for your router’s LAN interface.
Parameters
Description
LAN IP
Please input the IP address of this router.
IP Address
Designate the Access Point’s IP Address. This IP Address should be unique in
your network. The default IP Address is
192.168.0.1
.
Subnet Mask
Specify a Subnet Mask for your LAN segment. The Subnet Mask of the Access
Point is fixed and the value is
255.255.255.0
.
802.1d Spanning Tree
If it is enabled, this router will use the spanning tree protocol to prevent from
network loop happened in the LAN ports.
DHCP Server
Enable or disable the DHCP Server.
DHCP Server
These settings are only available when ‘DHCP Server’ in ‘LAN IP’ section is
‘Enabled’
Lease Time
The DHCP Server will temporarily assign IP addresses to LAN clients. In the
Lease Time setting you can specify the time period that the DHCP Server lends
an IP address to your LAN client. The DHCP Server will change your LAN client’s
IP address when this time threshold period is reached.
35
