User’s Manual of WNRT-633
-69-
5.6 Service Setup
5.6.1 Port Forwarding
Choose menu “
Service Setup
Port Forwarding
”, and you can configure to re-direct a particular
range of service port numbers from the Internet network to a particular LAN IP address. It helps users
to host some servers behind the firewall. After the configuration, please click the “Apply” button to save
the settings.
Figure 5-6-1
Port Forwarding
The page includes the following fields:
Object
Description
Enable Port Forwarding
Enable Port Forwarding function
IP Address
Add
LAN IP address
of specified host or server on the private local
network
Protocol
Select the port number protocol type (TCP, UDP or both). If you are
unsure, then leave it to the default both protocol
Port Range
Add ports you want to control. For TCP and UDP Services, enter the
beginning of the range of port numbers used by the service. If the
service uses a single port number, enter it in both the start and finish
fields.
Comment
The description of this setting
