User’s Manual of WNRT-633
-40-
Figure 5-3-5
PlanetDDNS Settings
Step 1.
Enable DDNS, and then select “
PLANET DDNS
”.
To set up for DDNS, follow these instructions:
Step 1.
Type the
Domain Name
you received from dynamic DNS service provider.
Step 2.
Type the
User Name
for your DDNS account.
Step 3.
Type the
Password
for your DDNS account.
Step 2.
Go to “
Security Setup-> Security
” page to allow remote access from WAN port.
Figure 5-3-6
Enable Web Access on WAN
Step 3.
Apply the settings, and ensure you have connected the WAN port to the internet by Ethernet
cable.
