Parameters
Description
Firmware Upgrade
This tool allows you to upgrade WNRT-620’s system firmware. To upgrade
the firmware of your Broadband router, you need to download the firmware
file to your local hard disk, and enter that file name and path in the
appropriate field on this page. You can also press the “Browse…” button to
find out the firmware file on your PC.
Once you’ve selected the new firmware file, click “Apply” bottom to start the upgrade process. (You may
have to wait a few minutes for the upgrade to complete and WNRT-620 restart). After the WNRT-620
restart, you can start using the router.
8.3 Reset
You can reset the router’s system should any problem exist. The reset function is essentially
Re-boot your router.
Parameters
Description
Reset
In the event that the system stops responding correctly or in some way stops
functioning, you can perform a reset.
Your settings will not be changed
. To
perform the reset, click on the “Apply” button. You will be asked to confirm
your decision. The reset will be complete when the power light stops
blinking. Once the reset process is complete you may start using the router
again.
- 74 -
After configuration complete, please click “Apply”
button, please wait for a while for the WNRT-620
restart.