– 3 –
– 4 –
– 2 –
– 7 –
– 8 –
– 5 –
– 6 –
2011-E23190-000
Method 1 : PLANET WNL-U556M supports WPS. Choose “Wi-Fi Protect
Setup” label, and click “Push Button Config (PBC)” button.
When the following window appears, press the WPS button
equipped on your AP.
If the screen appears during installation, please click “Continue Anyway”
button to continue.
he steps above introduce simple installation for WNL-U556M. For further
configuration of Wi-Fi Protect Setup (WPS), Software AP etc, please refer to
the user’s manual in the CD. If you have further questions, please contact
the local dealer or distributor where you purchased this product.
Method 2 : You can also configure the wireless network by yourself via
PLANET 11n USB Wireless LAN Utility. Click “Available
Network” label to search the available wireless AP, and click
twice on the AP you would like to connect.
STEP 2 : Click Next button to start installing the driver and utility. After the
software has been installed successfully, choose “Yes” and click
Finish button to restart your computer.
Key in the password of the wireless AP in the “network key”, and confirm
it again in the other field. Then click OK button. You’ll connect to the
wireless network successfully.
Then you’ll see the following message pop-up at lower-right corner of the
screen.
STEP 3 : After restarting the computer, insert the wireless adapter into
an empty USB port of your computer. Never force to insert the
adapter if you feel it get stuck. Flip the adapter over and try
again.
STEP 4 : The following window will be pop-up. Choose “No, not this
time” and click Next button to continue.
If the screen appears during installation, please click “Continue Anyway”
button to continue.
After the driver of wireless adapter has been installed successfully, you’ll
see another message pop-up at lower-right corner of the screen.
STEP 5 : Choose
“Install
the
software
automatically
(Recommended)”, and click Next button to install the driver. In
the end, click Finish button.
WNL-U556M
Quick Installation Guide
300Mbps 802.11n Wireless USB Adapter
Note
– 1 –
Thank you for choosing PLANET Wireless USB Adapter. Before installing the
adapter, please verify the contents inside the package box.
If there is any item missed or damaged, please contact the seller
immediately.
Quick Guide
CD-ROM
WNL-U556M
2. Installation Precautions
3. Connection Method
FURTHER INFORMATION:
Before installing the driver and utility of wireless adapter, do not insert the
device into the USB port of your computer.
Note
1. If you had ever installed other wireless adapters before,
please uninstall the existed drivers and utilities first.
2. The following installation is performed in Windows XP. The
procedures in other OS are similar.
And these two network devices will begin to negotiate with each other. Then
you’ll connect to the wireless network successfully.
STEP 1 : Insert the bundled CD into the CD-ROM drive. Then a web-menu
will appear. Click the “Windows Utility (Driver)” hyperlink to
initiate the installing wizard.
1. Package Contents
