Planet WNAP-6300, Руководство пользователя

Страница: 52 / 66

Chapter 5 Management Page 43
Click “ Browse ” to select the firmware file you would like to load;
Click “ Upload ” to start the upload process;
Wait a moment, the system will reboot after successful upgrade.
Note:
Do NOT cut the power off during upgrade, otherwise the system may crash!
5.4 Backup/ Retrieve Settings
It is strongly recommended you back up configuration information in case of something unexpected. If
tragedy hits your device, you may have an access to restore the important files by the backup. All
these can be done by the local or remote computer.
Open “ Configuration File ” in “ Management ” as below:
Figure 35 Backup/Retrieve Settings
Backup Settings
By clicking “ Save ”, a dialog box will pop up. Save it, then the configuration file like ap.cfg will be
saved to your local computer.
Retrieve Settings
By clicking “ Browse ”, a file selection menu will appear, select the file you want to load, like ap.cfg ;
Click “ Upload ” to load the file. After automatically rebooting, new settings are applied.