
Command Guide of WGSW-28040
66
4.4 Administration
4.4.1 enable
Command:
enable [
<1-15>
]
disable [
<1-14>
]
Parameter:
<1-15>
Specify privileged level to enable
<1-14>
Specify privileged level to enable
Default:
Default privilege level is 15 if no privilege level is specified on enable command.
Default privilege level is 1 if no privilege level is specified on disable command.
Mode:
User EXEC
Usage Guide:
In User EXEC mode, user only allows to do a few actions. Most of commands are only available in privileged EXEC
mode. Use “
enable
” command to enter the privileged mode to do more actions on switch.
In privileged EXEC mode, use “
exit
” command is able to go back to user EXEC mode with original user privilege level.
If you need to go back to user EXEC mode with different privilege level, use “
disable
” command to specify the
privilege level you need.
In privileged EXEC mode, the prompt will show “
Switch#
”
Example:
This example shows how to enter privileged EXEC mode and show current privilege level.
Switch>
enable
Switch#
show privilege
Current CLI Username:
Current CLI Privilege: 15
This example show how to enter user EXEC mode with privilege 3.
Содержание WGSW-28040
