Planet WGSW-28040 Скачать руководство пользователя страница 35

Страница: 35 / 351

Command Guide of WGSW-28040

4.2 AAA

4.2.1 aaa authentication

Command:

aaa authentication (login | enable) (default |

LISTNAME

)

METHODLIST

[

METHODLIST

] [

METHODLIST

] [

METHODLIST

]

no aaa authentication (login | enable)

LISTNAME

Parameter:

login

Add/Edit login authentication list

enable

Add/Edit enable authentication list

default

Edit default authentication list

LISTNAME

Specify the list name for authentication type

METHODLIST

Specify the authenticate method, including none, local, enable, , radius.

Default:

Default authentication list name for type login is “default” and default method is “local”.

Default authentication list name for type enable is “default” and default method is “enable”

Mode:

Global Configuration

Usage Guide:

page.

Enable authentication is used only on CLI for user trying to switch from User EXEC mode to Privileged EXEC mode.

Both of them support following authenticate methods.

Local:

Use local user account database to authenticate. (This method is not supported for enable authentication)

Enable:

Use local enable password database to authenticate.

Use remote Tacas+ server to authenticate.

Radius:

Use remote Radius server to authenticate.

None:

Do nothing and just make user to be authenticated.

Each list allows you to combine these methods with different orders. For example, we want to authenticate login user

with remote server, but server may be crashed. Therefore, we need a backup plan, such as another Radius

server. So we can configure the list with server as first authentication method and Radius server as second

one.

Содержание WGSW-28040
































































































































































































































































































































































Результаты поиска

Содержание WGSW-28040

Отзывы:

Похожие инструкции для WGSW-28040

Бренды по названию

Популярные бренды

Planet WGSW-28040, Руководство по управлению

Результаты поиска

Содержание WGSW-28040

Отзывы:

Похожие инструкции для WGSW-28040

Бренды по названию

Популярные бренды