Planet WGSW-24000 Скачать руководство пользователя страница 77

Страница: 77 / 158

processed by the CPU.

7.6.39 show mac-address-table gmrp

This command displays the GARP Multicast Registration Protocol (GMRP) entries in the Multicast

Forwarding Database (MFDB) table.

▫

Format show mac-address-table gmrp

▫

Mode

Privileged EXEC

▫

Mac Address -

A unicast MAC address for which the switch has forwarding and or filtering

information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for

example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as 8 bytes.

▫

Type -

This displays the type of the entry. Static entries are those that are configured by the end

user. Dynamic entries are added to the table as a result of a learning process or protocol.

▫

Description -

The text description of this multicast table entry.

▫

Interfaces -

The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).

7.6.40 show mac-address-table igmpsnooping

This command displays the IGMP Snooping entries in the Multicast Forwarding Database (MFDB) table.

▫

Format show mac-address-table igmpsnooping

▫

Mode Privileged EXEC

▫

Mac Address -

A unicast MAC address for which the switch has forwarding and or filtering

information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for

example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as 8 bytes.

▫

Type -

This displays the type of the entry. Static entries are those that are configured by the end

user. Dynamic entries are added to the table as a result of a learning process or protocol.

▫

Description -

The text description of this multicast table entry.

▫

Interfaces -

The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).

7.6.41 show mac-address-table multicast

This command displays the Multicast Forwarding Database (MFDB) information. If the command is

entered with no parameter, the entire table is displayed. This is the same as entering the optional all

parameter. The user can display the table entry for one MAC Address by specifying the MAC address as

an optional parameter.

▫

Format

show mac-address-table multicast [<macaddr> | all]

▫

Mode

Privileged EXEC

▫

Mac Address -

A unicast MAC address for which the switch has forwarding and or filtering

information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for

example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as 8 bytes.

▫

Type -

This displays the type of the entry. Static entries are those that are configured by the end

Содержание WGSW-24000































































































































































Результаты поиска

Содержание WGSW-24000

Отзывы:

Planet WGSW-24000, Руководство пользователя, Страница: 77 / 158

Результаты поиска

Содержание WGSW-24000

Отзывы: