Planet WGSW-24000 Скачать руководство пользователя страница 133

Страница: 133 / 158

RADIUS accounting server.

▫

Responses -

The number of RADIUS packets received on the accounting port from this server.

▫

Malformed Responses -

The number of malformed RADIUS Accounting-Response packets

received from this server. Malformed packets include packets with an invalid length. Bad

authenticators and unknown types are not included as malformed accounting responses.

▫

Bad Authenticators -

The number of RADIUS Accounting-Response packets containing invalid

authenticators received from this accounting server.

▫

Pending Requests -

The number of RADIUS Accounting-Request packets sent to this server that

have not yet timed out or received a response.

▫

Timeouts - The number of accounting timeouts to this server.

▫

Unknown Types -

The number of RADIUS packets of unknown types, which were received from

this server on the accounting port.

▫

Packets Dropped -

The number of RADIUS packets received from this server on the accounting

port and dropped for some other reason.

9.1.23 show authentication

This command displays the ordered authentication methods for all authentication login lists.

▫

Format show authentication

▫

Mode

Privileged EXEC

▫

Authentication Login List -

This displays the authentication login listname.

▫

Method 1 -

This displays the first method in the specified authentication login list, if any.

▫

Method 2 -

This displays the second method in the specified authentication login list, if any.

▫

Method 3 -

This displays the third method in the specified authentication login list, if any.

9.1.24 show authentication users

This command displays information about the users assigned to the specified authentication login list. If

the login is assigned to non-configured users, the user "default" will appear in the user column.

▫

Format

show authentication users <listname>

▫

Mode

Privileged EXEC

▫

User -

This field displays the user assigned to the specified authentication login list.

▫

Component -

This field displays the component (User or 802.1x) for which the authentication login

list is assigned.

9.1.25 show dot1x

This command is used to show a summary of the global dot1x configuration, summary information of the

dot1x configuration for a specified port or all ports, the detailed dot1x configuration for a specified port

and the dot1x statistics for a specified port - depending on the tokens used.

▫

Format

show dot1x [{summary {<slot/port> | all}} | {detail <slot/port>} | {statistics

Содержание WGSW-24000































































































































































Результаты поиска

Содержание WGSW-24000

Отзывы:

Planet WGSW-24000, Руководство пользователя, Страница: 133 / 158

Результаты поиска

Содержание WGSW-24000

Отзывы: