Planet WGSW-24000 Скачать руководство пользователя страница 132

Страница: 132 / 158

▫

Format

no radius server retransmit

▫

Mode

Global Config

9.1.21 radius server timeout

This command sets the timeout value (in seconds) after which a request must be retransmitted to the

RADIUS server if no response is received. The timeout value is an integer in the range of 1 to 30.

▫

Default 6

▫

Format

radius server timeout <seconds>

▫

Mode

Global Config

9.1.21.1 no radius server timeout

This command sets the timeout value (in seconds) after which a request must be retransmitted to the

RADIUS server if no response is received, to the default value, i.e. 6.

▫

Format

no radius server timeout

▫

Mode

Global Config

9.1.22 show accounting

This command is used to display the configured RADIUS accounting mode, accounting server and the

statistics for the configured accounting server.

▫

Format

show accounting [statistics <ipaddr>]

▫

Mode

Privileged EXEC

If the optional token 'statistics <ipaddr>' is not included, then only the accounting mode and the RADIUS

accounting server details are displayed.

▫

Mode

Enabled or disabled

▫

IP Address -

The configured IP address of the RADIUS accounting server

▫

Port -

The port in use by the RADIUS accounting server

▫

Secret Configured -

Yes or No

If the optional token 'statistics <ipaddr>' is included, the statistics for the configured RADIUS accounting

server are displayed. The IP address parameter must match that of a previously configured RADIUS

accounting server. The following information regarding the statistics of the RADIUS accounting server is

displayed.

▫

Accounting Server IP Address -

IP Address of the configured RADIUS accounting server

▫

Round Trip Time -

The time interval, in hundredths of a second, between the most recent

Accounting-Response and the Accounting-Request that matched it from the RADIUS accounting

server.

▫

Requests -

The number of RADIUS Accounting-Request packets sent to this accounting server.

This number does not include retransmissions.

▫

Retransmission -

The number of RADIUS Accounting-Request packets retransmitted to this

Содержание WGSW-24000































































































































































Результаты поиска

Содержание WGSW-24000

Отзывы:

Planet WGSW-24000, Руководство пользователя, Страница: 132 / 158

Результаты поиска

Содержание WGSW-24000

Отзывы: