Planet WGSW-24000 Скачать руководство пользователя страница 127

Страница: 127 / 158

9.1.7.1 no dot1x max-req

This command sets the maximum number of times the authenticator state machine on this port will

transmit an EAPOL EAP Request/Identity frame before timing out the supplicant to the default value, i.e.

▫

Format

no dot1x max-req

▫

Mode

Interface Config

9.1.8 dot1x port-control

This command sets the authentication mode to be used on the specified port. . The control mode may be

one of the following.

▫

force-unauthorized:

The authenticator PAE unconditionally sets the controlled port to

unauthorized.

▫

force-authorized:

The authenticator PAE unconditionally sets the controlled port to authorized.

▫

auto:

The authenticator PAE sets the controlled port mode to reflect the outcome of the

authentication exchanges between the supplicant, authenticator and the authentication server.

▫

Default auto

▫

Format

dot1x port-control {force-unauthorized | force-authorized | auto}

▫

Mode

Interface Config

9.1.8.1 no dot1x port-control

This command sets the authentication mode to be used on the specified port to 'auto'.

▫

Format

no dot1x port-control

▫

Mode

Interface Config

9.1.9 dot1x port-control All

This command sets the authentication mode to be used on all ports. The control mode may be one of the

following.

▫

force-unauthorized:

The authenticator PAE unconditionally sets the controlled port to

unauthorized.

▫

force-authorized:

The authenticator PAE unconditionally sets the controlled port to authorized.

▫

auto:

The authenticator PAE sets the controlled port mode to reflect the outcome of the

authentication exchanges between the supplicant, authenticator and the authentication server.

▫

Default auto

▫

Format

dot1x port-control all {force-unauthorized | force-authorized | auto}

▫

Mode

Global Config

9.1.9.1 no dot1x port-control All

This command sets the authentication mode to be used on all ports to 'auto'.

▫

Format

no dot1x port-control all

Содержание WGSW-24000































































































































































Результаты поиска

Содержание WGSW-24000

Отзывы:

Planet WGSW-24000, Руководство пользователя, Страница: 127 / 158

Результаты поиска

Содержание WGSW-24000

Отзывы: