User’s Manual of WGSW-20160HP
392
Security Switch Access IPv6 Add
Description:
Add access management IPv6 entry, default: Add all supported protocols.
Syntax:
Security Switch Access Ipv6 Add <access_id> <start_ipv6_addr> <end_ipv6_addr> [web] [snmp] [telnet]
Parameters:
<access_id>
: entry index (1-16)
<start_ipv6_addr>
: Start IPv6 address.
IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a
colon separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous
zeros; but it can only appear once. It also used a following legally IPv4 address. For
example,'::192.1.2.34'.
<end_ipv6_addr>
: End IPv6 address.
IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a
colon separates each field (:). For example,'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous
zeros; but it can only appear once. It also used a following legally IPv4 address. For
example,'::192.1.2.34'.
web
: Indicates that the host can access the switch from HTTP/HTTPS
snmp
: Indicates that the host can access the switch from SNMP
telnet
: Indicates that the host can access the switch from TELNET/SSH
Security Switch Access Delete
Description:
Delete access management entry.
Syntax:
Security Switch Access Delete <access_id>
Parameters:
<access_id>
: entry index (1-16)
