User’s Manual of WGSW-20160HP
V1 Leave Received
The number of Received V1 Leaves.
Router Port
Display which ports act as router ports. A router port is a port on the Ethernet
switch that leads towards the Layer 3 multicast device or IGMP querier.
Static denotes the specific port is configured to be a router port.
Dynamic denotes the specific port is learnt to be a router port.
Both denote the specific port is configured or learnt to be a router port.
Port
Switch port number.
Status
Indicate whether specific port is a router port or not.
Buttons
: Click to refresh the Page immediately.
: Clears all Statistics counters.
Auto-refresh
: Automatic refresh occurs every 3 seconds.
4.8.12 MLD Group Information
Entries in the MLD Group Table are shown on this Page. The MLD Group Table is sorted first by VLAN ID, and then by group.
Each Page shows up to 99 entries from the MLD Group table, default being 20, selected through the "entries per Page" input
field. When first visited, the web Page will show the first 20 entries from the beginning of the MLD Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD Group Table.
The MLD Groups Informatino screen in
Figure 4-8-15
appears.
Figure 4-8-15:
MLD Snooping Groups Information Page Screenshot
The Page includes the following fields:
Object
Description
VLAN ID
VLAN ID of the group.
Groups
Group address of the group displayed.
Port Members
Ports under this group.
174
