Planet WGS-4215-8T2S Скачать руководство пользователя страница 194

Страница: 194 / 359

User’s Manual of WGS Managed Series

194

The page includes the following fields:

Object

Description

•

VLAN ID

Display the current VLAN ID

•

Port Mask

Display the current port mask

4.7.4.6 MLD Forward All

This page provides MLD Forward All. The Forward All screen in

Figure 4-7-33

appears.

Figure 4-7-33

Forward All Setting Page Screenshot

The page includes the following fields:

Object

Description

•

VLAN ID

Select VLAN ID from this drop-down list to assign MLD membership

•

Port

The switch port number of the logical port

•

Membership

Select MLD membership for each interface:

Forbidden:

Interface is forbidden from automatically joining the MLD via MVR.

None:

Interface is not a member of the VLAN. Packets associated with
this VLAN will not be transmitted by the interface.

Static:

Interface is a member of the MLD.

Buttons

: Click to apply changes.

Содержание WGS-4215-8T2S








































































































































































































































































































































































Результаты поиска

Содержание WGS-4215-8T2S

Отзывы:

Planet WGS-4215-8T2S, Руководство пользователя, Страница: 194 / 359

Результаты поиска

Содержание WGS-4215-8T2S

Отзывы: