4.11 Storm Control
This function is to control the Braodcast Storm, Multicast Storm and Flooded Storm packet on each port.
To configure the Storm Control, click on the
Storm Control
menu button. The web main page then shows the
Strom Restricting function table.
1. Fill
the
Port List
field in the
Broadcast Storm Restricting
table, select the type in the
Restricting Type
drop
down menu and enter the packet size in the
Flow
field.
2. Click on the
“OK”
button to save.
3. To remove the Storm Restricting function on the port, simpy click on the
“Delete”
button in the
Show Port
Restricting Table
table.
