Planet VRT-401G Скачать руководство пользователя | Manualshive

Страница: 33 / 86

background image

2.2.5 L2TP

Select L2TP if your ISP requires the L2TP protocol to connect you to the Internet. Your ISP
should provide all the information required in this section. (See chapter 1 “L2TP” for more detail)

2.2.6 Telstra Big Pond

Select Telstra Big Pond if your ISP requires the Telstra Big Pond protocol to connect you to the
Internet. Your ISP should provide all the information required in this section. Telstra Big Pond
protocol is used by the ISP in Australia. (See chapter 1 “Telstra Big Pond” for more detail)

2.2.7 DNS

A Domain Name System (DNS) server is like an index of IP addresses and Web addresses. If
you type a Web address into your browser, such as www.router.com, a DNS server will find that
name in its index and the matching IP address. Most ISPs provide a DNS server for speed and
convenience. If your Service Provider connects you to the Internet with dynamic IP settings, it is
likely that the DNS server IP address is provided automatically. However, if there is a DNS server
that you would rather use, you need to specify the IP address of that DNS server here.

Parameters

Description

Domain Name Server (DNS) Server

This is the ISP’s DNS server IP address that
they gave you; or you can specify your own
preferred DNS server IP address

Secondary DNS Address (optional)

This is optional. You can enter another DNS
server’s IP address as a backup. The secondary
DNS will be used should the above DNS fail.

Click <

Apply>

at the bottom of the screen to save the above configurations. You can now

configure other advance sections or start using the router (with the advance settings in place)

33

«
...
31
32
33
34
35
...
»

Содержание VRT-401G























































































Отзывы:

Нет отзывов

Похожие инструкции для VRT-401G

Бренд: Moxa Technologies Страницы: 20

Бренд: TP-Link Страницы: 2

RangeMax WNR3500

Бренд: NETGEAR Страницы: 2

Бренд: LevelOne Страницы: 60

Бренд: NETGEAR Страницы: 10

Бренд: Cables to Go Страницы: 63

Бренд: Master&Dynamic Страницы: 162

Бренд: TP-Link Страницы: 86

Бренд: iBall Baton Страницы: 62

Бренд: SUNDRAY Страницы: 20

Бренд: Symbol Страницы: 100

Бренд: MOB Страницы: 20

Бренд: Kaba Страницы: 2

access manager 92 30

Бренд: Kaba Страницы: 89

Бренд: EnGenius Страницы: 4

Бренд: Orbitel Страницы: 27

FRITZ! Powerline 1260E

Бренд: AVM Страницы: 44

Бренд: BroadLink Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды