High Definition Color PoE IP Phone with Dual Display
VIP-2140PT
66
Parameters
Description
Enable Feature Sync
Feature Sync with server.
Enable GRUU
Supports Globally Routable User-Agent URI (GRUU).
BLF Server
The registered server will receive the subscription package
from ordinary application of BLF phone.
Please enter the BLF server, if the sever does not support
subscription package, the registered server and subscription
server will be separated.
BLF List Number
BLF List allows one BLF key to monitor the status of a group.
Multiple BLF lists are supported.
SIP Encryption
Enable SIP encryption such that SIP transmission will be
encrypted
SIP Encryption Key
Set the pass phrase for SIP encryption
RTP Encryption
Enable RTP encryption such that RTP transmission will be
encrypted
RTP Encryption Key
Set the pass phrase for RTP encryption
7.13 LINES (Dial Peer)
This functionality offers you more flexible dial rule; you can refer to the following contents to know how to use
this dial rule.
Parameters
Description
Phone number
There are two types of matching: Full Matching or Prefix Matching. In Full
matching, the entire phone number is entered and then mapped per the Dial
Peer rules.
In prefix matching, only part of the number is entered followed by T. The
mapping with then take place whenever these digits are dialed. Prefix mode
supports a maximum of 30 digits.
Note: Two different special characters are used.
x -- Matches any single digit that is dialed.
[ ] -- Specifies a range of numbers to be matched. It may be a range, a list of ranges separated by
commas, or a list of digits.
Destination
Set Destination address. This is for IP direct.
Port
Set the Signal port, and the default is 5060 for SIP.
Alias
Set the Alias. This is the text to be added, replaced or deleted. It is an optional
item.
Note: There are four types of aliases.
