16
3.3 Chassis Installation and Rack Mounting
To install the Video over fiber Converter in a
10-inch or
19-inch Converter Chassis with standard rack, follow the
instructions described below.
Step 1:
Place your Converter Chassis on a hard flat surface,
with the front panel positioned toward your front side.
Step 2:
Carefully slide in the module until it is fully and firmly
fitted into the slot of the Converter Chassis.
Figure 3-2:
Insert a video over fiber converter into an available slot
Step 3: Attach a rack-mount bracket to each side of the
Converter Chassis with supplied screws attached to
the package.
Step 4: After the brackets are attached to the Converter
Chassis, use suitable screws to securely attach the
brackets to the rack.
Step 5: Proceed with steps 4 and 5 of Section 3.2 Stand-
alone Installation
to connect the video and fiber
cabling and supply power to your Converter Chassis.