1. Package Contents
Note
– 1 –
– 2 –
– 3 –
– 4 –
– 7 –
– 8 –
– 5 –
– 6 –
Front Panel of VDR-301N
Interfaces and Ports of VDR-301N
VDR-301N
Quick Guide
RJ11 Cable
VDSL Splitter
The above steps introduce the simple installation and configura-
tions of the VDR-301N. For further configurations of different
operation modes, please refer to the user manual, which can be
downloaded from the website.
http://www.planet.com.tw/en/support/download.php?type1=32
0&model=48957&type=3
If you have further questions, please contact the local dealer or
distributor where you purchased this product.
Thank you for choosing PLANET VDR-301N. Before installing the
AP, please verify the contents inside the package box.
If there is any item missing or damaged, please
contact the seller immediately.
Step 1:
Connect the Power Adapter to VDR-301N. Check
whether the PWR LED and LAN LED on the front panel
are on accordingly.
Step 2:
Follow the figure below to connect the network
devices.
VDR-301N
Quick Installation Guide
802.11n Wireless VDSL2 Bridge Router
Steps:
Set your computer to get an IP address from the
Wireless Router:
1. Click the
“Start”
button located at lower-left corner of the
screen.
2. Click
“Control Panel”
.
3. Double-click
“Network and Sharing Center”
icon.
4. Click
“Change Adapter Settings”
.
5. Double-click the
“Local Area Connection”
icon.
6. Select
“Internet Protocol Version 4 (TCP/IPv4)”
and
click the
“Properties”
button.
7. Select
“Obtain an IP address automatically”
and
“Obtain DNS server address automatically”
, and then
click the
“OK”
button twice to save the configuration.
VDSL2 Router with PPPoE:
Follow the steps below to set up connection to
PPPoE
mode.
1. Log in the VDR-301N’s web-based configuration utility.
2. Click
“Setup”
.
3. Select
“DSL WAN”
.
4. Choose
PTM
, and then select the Channel Mode to
“PPPoE”
.
5. Select the IP Protocol to
“IPv4”
.
6. Fill in
User Name
and
Password
which are provided by
ISP.
7. After setting it up, press
“Add”
.
If you need more information about WAN service, please refer
to the User’s Manual.
VDSL2 Router with Bridge:
Follow the steps below to set up connection to
Bridge
mode.
1. Log in the VDR-301N’s web-based configuration utility.
2. Click
“Setup”
.
3. Click
“DSL WAN”
.
4. Choose
PTM
, and then select the Channel Mode to
“Bridge”
.
5. Select the IP Protocol to
“IPv4”
.
6. Press
“Add”
.
If you need more information about WAN service, please refer
to the User’s Manual.
Power Adapter
RJ45 Cable
Default IP Address:
192.168.1.1
Default User Name:
admin
Default Password:
admin
Default SSID:
PLANET_XXXX
(“X” means the last 4 digits of the MAC address.)
Now, you can see the Web management UI of the VDR-301N.
2. Physical Introduction
4. Web Login
5. Broadband Connection for VDSL
Further Information
3. Hardware Installation
Power Adapter
Power
LINE
PHONE
MODEM
Power
Adapter
Power
RJ11
RJ45
PC/Laptop
Splitter
Phone
Jack
Telephone
PHONE
MODEM
DSL
WAN
WLAN
Power
12V DC
WPS
Reset
LAN1~4
Power
DSL
WPS
WLAN
Internet
LAN1~4
PLANET Technology Corp.
11F., No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
2011-AC0390-000
