Planet POE-E304 Скачать руководство пользователя страница 1

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET 1-port Ultra PoE+ to 4-port IEEE 
802.3af/at Gigabit PoE Extender, POE-E304. 

“Gigabit PoE Extender”

 

mentioned in this manual refers to the POE-E304.
Open the box of the Gigabit PoE Extender and carefully unpack it. The 
box should contain the following items:

Gigabit PoE Extender x 1

User’s Manual x 1

Rubber Feet x 4

Wall-mount Kit

If any of these are missing or damaged, please contact your dealer 
immediately; if possible, retain the carton including the original packing 
material, and use them again to repack the product in case there is a 
need to return it to us for repair.

 

„

Features  Store-and-Forward  mode  with  wire-speed  filtering  and 
forwarding rates

 

„

IEEE 802.3x flow control for full duplex operation and backpressure 
for half duplex operation

 

„

Automatic address learning and address aging

 

Case and Installation

 

„

No external power cable installation required

 

„

Made of metal, desktop size design

 

„

Wall-mountable, Plug-and-Play installation

 

„

0 ~ 50 degrees C operating Temperature

Note

PSE (Power Sourcing Equipment)

 is a device (switch 

or hub for instance) that will provide power in a PoE 
setup. The maximum allowed continuous output power 
per such device in IEEE 802.3af is 15.4 watts and in IEEE 
802.3at is 30 watts.

PD (Powered Device)

 such as IP phones, network 

cameras or wireless access points is a PoE-enabled 
terminal that consumes energy supplied by PSE.

4. Hardware Introduction

4.1  Three-View Diagram

The three-view diagram of the Gigabit PoE Extender consists of one 
auto-sensing 10/100/1000BASE-T Ultra PoE In port, and four auto-
sensing 10/100/1000BASE-T 802.3af/802.3at PoE Out ports. The LED 
Indicators are also located on the port of Gigabit PoE Extender front 
panel.

50~56V DC

PoE Extender

PoE In-Use

PoE MAX

PWR

1

2

3

4

5

4

1

2

PoE OUT

PoE IN

3

POE-E304

10/100
1000
LNK

ACT

Figure 1:

  POE-E304

Protection

ESD (Ethernet): 6KV
Surge (EFT for power): 2KV

Enclosure

Metal

Installation

Desktop/Wall mountable

Dimensions
(W x D x H)

160 x 92.5 x 28mm

Weight

370g

Power 
Requirements

PoE In: IEEE 802.3bt or 4-pair 802.3at PoE+ 

compliant with voltage within 50V-56V DC

External DC: 50~56V DC

Power 
Consumption

4 watts/13.7BTU (System on with PoE input)
6 watts/20.6BTU (Ethernet full loading without PoE 

function)

60 watts/205.9BTU (Full loading with PoE function)

Network Cable

10BASE-T: 4-pair UTP Cat5 up to 100m (328ft)
100BASE-TX: 4-pair UTP Cat5 up to 100m (328ft)
1000BASE-T: 4-pair UTP Cat5e, 6, up to 100m 

(328ft)

EIA/TIA-568 100-ohm STP (100m, 328ft)

Power over Ethernet

PoE Standard

PoE In Port

Ultra Power over Ethernet end-span/mid-span PD 
class 4 PD

Per PoE Out Port

IEEE 802.3at Power over Ethernet Plus end-span 
PSE
IEEE 802.3af Power over Ethernet end-span PSE

2. Product Features

 

Physical Port

 

„

5-port 10/100/1000BASE-T Gigabit RJ45 interface
-  1-port data + power input
-  4-port data + power output

 

Power over Ethernet

 

„

1-port data + power input
-  Complies with Ultra Power over Ethernet end-span/mid-span PD
-  Supports PoE input power up to 60 watts

 

„

4-port data + power output
-  Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet/

end-span PSE

-  Up to 4 IEEE 802.3af/802.3at devices powered
-  Supports PoE power up to 30.8 watts for each PoE port
-  Auto detects powered device (PD)

 

„

Extends the range of PoE to an additional 100 meters (328ft.)

 

„

Forwards both Ethernet data and PoE power to remote device

 

Layer 2 Features

 

„

Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/
MDI-X

 

„

Integrates address look-up engine, supporting 2K absolute MAC 
addresses

 

„

9K Jumbo packet support

 

„

IEEE 802.1Q VLAN transparency

PoE Power

PoE In Port

50~56V DC, max. 60 watts

Per PoE Out Port

44~55V DC, max. 30.8 watts

Power Pin 
Assignment

PoE In Port

1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) or 1/2(-), 3/6(+); 
4/5(+), 7/8(-)

Per PoE Out Port

1/2 (+), 3/6 (-), end-span (Type A)

PoE Power 
Budget

50 watts (max.) @ Ultra PoE input
20 watts (max.) @ IEEE 802.3at PoE+ input

Standard Conformance

Regulatory 
Compliance

FCC Part 15 Class A, CE

Standard 
Compliance

IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3x Flow Control

Environment

Operating

Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Storage

Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Note

The maximum distance that data and power can transmit 
depends on the quality of the UTP cable and environment.

4.2  Ports Connection

PoE IN Port

Connect the 

PoE IN

 port from the following Ultra 

PSE

 

devices through a Cat5/5e/6 UTP cable:

 Ultra PoE injector

 Ultra PoE injector hub

 Ultra PoE Ethernet switch

PoE OUT Port

Connect the 

PoE OUT

 port to the following 802.3at/af 

PD

 devices through a Cat5/5e/6 UTP cable:

 PoE IP camera

 PoE VoIP phone

 PoE wireless AP

 PoE splitter

4.3  LED Indicators

Ultra PoE IN Port

LED

Color

Function

10/100 LNK/
ACT

Orange

Lights

 to indicate the link through that port is 

successfully established at 1000Mbps.

Blinks

 to indicate that the port is actively 

sending or receiving data.

1000
LNK/ACT

Green

Lights

 to indicate the link through that port is 

successfully established at 1000Mbps.

Blinks

 to indicate that the port is actively 

sending or receiving data.

3. Product Specifications

Model

POE-E304

Hardware Specifications

Network 
Connector

PoE In Port

1 x 10/100/1000BASE-T Ethernet with Ultra PoE 
b in, auto MDI/MDI-X, auto-negotiation RJ45 
connector

PoE Out Port

4 x 10/100/1000BASE-T Ethernet with IEEE 
802.3at/802.3af PoE 

“Data + DC”

 out, auto MDI/

MDI-X, auto-negotiation RJ45 connector

Data Rate

10/100/1000Mbps

Switch 
Architecture

Store-and-Forward

MAC Address 
Table

2K

Data Buffer

2Mbits

Switch Fabric

10Gbps

Switch 
Throughput

7.44Mpps @ 64 bytes

Jumbo Frame

9K

Flow Control

IEEE 802.3x pause frame for full duplex
Back pressure for half duplex

LED Indicators

PoE In Port

10/100 LNK/ACT (

orange

), 1000 LNK/ACT (

green

)

PoE Out Port 1 to Port 4

10/100 LNK/ACT (

orange

), 1000 LNK/ACT (

green

)

PoE-in-Use (

orange

)

PoE Max. (

orange

)

Отзывы: